The machine bad is of one piece, closed grained, graded cast iron. Box structure bed is design by using latest FHP and Solid edge software, heavily reinforced with ribs, provides high rigidity and stability.

Grinding wheel hade is fixed to the machine and consist spindle and spindle bearing.The grinding wheel spindle is made from high nickel-chrome-molybdenum steel (EN36C), case hardened, precisely ground and mirror lapped, runes in hydrodynamic, Filmatic, tilting pad segment (Phosphorus bronze PB2) type bearing, as similar as Cincinnati and other imported centerless grinding machine mfrs. Are using.

Regulating wheel head is mounted on double slide and swivel plate arrangement and can tilted up to -1° to +5° tilting angle,The regulating wheel head spindle is also made from nickel-chrome-molybdenum steel, case hardened, precisely ground and runes in hydrodynamic bearing, (Duel support with precision bearing available at extra cost)

There are two set of straight wheel truing unit is provided in machine, each is for grinding wheel and regulating wheel.Hydraulically operated wheel truing slide for both wheel, and speed and direction can be changed by a single Direction Control valve,Profile dressing in grinding wheel.

Hydraulic unit is provided separately, and supplies oil for lubrication of spindle and also for dressing cylinder.

Electrical are housed in dust heat and moisture free cabinet, consist reputed make switches contactors. Programmable logic controller for auto plunge grinding machine.

MODEL	LEXUS 16-6 CNC	LEXUS 16-8 CNC	CLASSIC 2010 CNC	ELENTRA 2412 CNC
Gr. Wheel. Size (DXWXH)	400 X 150 X 228.6	400 X 200 X 228.6	508 X 250 X 305	610 X 305 X 305
Reg. Wheel size.	250 X 150 X 127	250 X 200 X 127	305 X 250 X 160	355 X 305 X 160
Grinding Range.	1-70mm	1-70mm	4-180mm	10-250mm
Max in-feed gr.	1150	200	250	300
Gr. Spindle bearings	Hydrodynamic.
Gr. Wheel Speed @ 50hz.	33MS-1 (45 Ms-1 Optional)
Reg. Wheel Speed.	10-200 RPM
Reg. Wheel tilt angle.	-1° to 5°
Reg. Wheel swivel angle.	±3°
Gr. Wheel Dresser.	Hydraulic (Motorized with VFD & SCREW optional)
Reg. Wheel Dresser.	Hydraulic (Motorized with VFD & SCREW optional)
Spindle Motor Cap.	7.5HP -1440 RPM	10HP -1440 RPM	20HP -1440 RPM	25HP -1440 RPM
Reg. Wheel Motor. Cap.	1 HP	2 HP	2 HP	5 HP
Hydraulic Motor Cap.	0.5 HP
Coolant Motor.	0.16 HP	0.16 HP	0.25 HP	0.5 HP
LMP.	60	80	150	200
Machine Dimension.	2250 X 1500		2700 X 2700	3200 X 2700
Machine Weight.	2400 Kg	2700 Kg	5000 Kg	6500 Kg

1. CNC Hydraulic wheel profile truing attachment for Grinding wheel.
2. Hydraulic wheel Profile truing attachment for reg. wheel.
3. Grinding wheel (A60L5VC11) with flange.
4. Control wheel with flange.
5. Work rest block for in feed or through feed grinding job.
6. One straight work rest blade hardened suitable for job.
7. Coolant Tank with pump and piping.
8. Hydraulic Power pack.
9. Standard Color painted.
10. Lubrication pump hand lever type with piping
11. A.C. variable drive, gearbox and motor for control wheel
12. Ball screw for feed with micro feed.

1. Automatic ring transfer line for bearing races rear side, Max. 3 Band and 7.5 Mtr OVL
2. Ring feeding attachment for bearing rings, cap 50-200mm
3. Additional grinding wheel flange & Reg. Wheel Flange
4. Reg. wheel Head with Precision bearing duel supported & air Purge system
5. Hydraulic auto In-feed(Plc controlled)
6. Work rests block other than standard.
7. Carbide work rest blade for straight grinding.
8. Magnetic coolant clarifier.
9. Paper band cum Magnifier filter unit.
10. Turcite B coating on bottom slide
11. Automatic lubrication system
12. Servo operated feed system ready for through feed and in-feed grinding (NC)
13. Servo operated automatic plunge grinding with auto compensation of grinding wheel dressing stock, (2 Axis servo controlled)
14. Dynamic wheel balancing system ACCRETECH Japan Make, Fully automatic
15. Full Enclosed Cover, with coolant flushing system